Team32 time then
main battle tank karthus medikopter 117 megamegapowershot gg
Hurray!
once upon a midnight dreary, while i pron surfed, weak and weary, over many a strange and spurious site of ' hot xxx galore'. While i clicked my fav'rite bookmark, suddenly there came a warning, and my heart was filled with mourning, mourning for my dear amour, " 'Tis not possible!", i muttered, " give me back my free hardcore!"..... quoth the server, 404.
Batman AA Benchmark
4670
Min - 12
Avg - 32
Max - 87
5770
Min - 42
Avg - 59
Max - 139
Furmark
4670
1482 o3Marks
5770
4673 o3Marks
4670
Min - 12
Avg - 32
Max - 87
5770
Min - 42
Avg - 59
Max - 139
Furmark
4670
1482 o3Marks
5770
4673 o3Marks
Last edited by Finray (2009-12-11 07:47:05)
One is an MSI, one a Club3D and one a Palit..Sup wrote:
I have one and it works flawless for the past two years. The PCB is made by Gigabyte. How about yours?Freezer7Pro wrote:
I own three 8800GTs, of which one is almost completely broken, one semi-broken and one just a little unstable sometimes. Why can't Nvidia make PCB and solder joints that actually hold up?!
I guess I shouldn't complain about the quality, they're just the cheapest ones I could find.
The idea of any hi-fi system is to reproduce the source material as faithfully as possible, and to deliberately add distortion to everything you hear (due to amplifier deficiencies) because it sounds 'nice' is simply not high fidelity. If that is what you want to hear then there is no problem with that, but by adding so much additional material (by way of harmonics and intermodulation) you have a tailored sound system, not a hi-fi. - Rod Elliot, ESP
There's part of the problem...Freezer7Pro wrote:
MSI
idk about the others, never seen them anywhere before
lol, if anyone hates MSI it's freezer.
YAYYYY my chip finally went through compiler...! Gonna go try it on FPGA board tomorrow to see if really works like it should.
Last edited by GC_PaNzerFIN (2009-12-11 16:12:19)
3930K | H100i | RIVF | 16GB DDR3 | GTX 480 | AX750 | 800D | 512GB SSD | 3TB HDD | Xonar DX | W8
The MSI is unbelievably the one that's the least broken.nickb64 wrote:
There's part of the problem...Freezer7Pro wrote:
MSI
idk about the others, never seen them anywhere before
The idea of any hi-fi system is to reproduce the source material as faithfully as possible, and to deliberately add distortion to everything you hear (due to amplifier deficiencies) because it sounds 'nice' is simply not high fidelity. If that is what you want to hear then there is no problem with that, but by adding so much additional material (by way of harmonics and intermodulation) you have a tailored sound system, not a hi-fi. - Rod Elliot, ESP
So this summer I doscovered that my dad's 25-year old Sound Dynamics monitors were broken...and that he's kept using them.
As you can see, the woofer is gone. UV rays.
So I went and bought some new ones!
And bingo! Like new (or so I am told)...eargasm! Huge bass...
As you can see, the woofer is gone. UV rays.
So I went and bought some new ones!
And bingo! Like new (or so I am told)...eargasm! Huge bass...
Last edited by TSI (2009-12-11 21:00:25)
I like pie.
TSI wrote:
So this summer I doscovered that my dad's 25-year old Sound Dynamics monitors were broken...and that he's kept using them.
http://static.bf2s.com/files/user/31874 … 180343.jpg
http://static.bf2s.com/files/user/31874 … 180400.jpg
As you can see, the woofer is gone. UV rays.
So I went and bought some new ones!
http://static.bf2s.com/files/user/31874 … 183418.jpg
http://static.bf2s.com/files/user/31874 … 183433.jpg
And bingo! Like new (or so I am told)...eargasm! Huge bass...
In getting ready for my upcoming holiday, I kinda gave up trying to find replacements tweeters for the Mordaunt Short speakers..
It's also why I never made that audio thread.. I feel bad tho.. =/
What did you use to design it? Are you a verilog or VHDL man?GC_PaNzerFIN wrote:
YAYYYY my chip finally went through compiler...! Gonna go try it on FPGA board tomorrow to see if really works like it should.
Quartus II for Cyclone II FPGA. Straight on logic gate level then synthetized on logic processor on Altera DE2 board.Bertster7 wrote:
What did you use to design it? Are you a verilog or VHDL man?GC_PaNzerFIN wrote:
YAYYYY my chip finally went through compiler...! Gonna go try it on FPGA board tomorrow to see if really works like it should.
Last edited by GC_PaNzerFIN (2009-12-12 08:50:30)
3930K | H100i | RIVF | 16GB DDR3 | GTX 480 | AX750 | 800D | 512GB SSD | 3TB HDD | Xonar DX | W8
Did you get whole new woofers or did you refoam them? Anyhow, the suspension looks a bit ill-fit on the left (bottom in pic) sideTSI wrote:
So this summer I doscovered that my dad's 25-year old Sound Dynamics monitors were broken...and that he's kept using them.
http://static.bf2s.com/files/user/31874 … 180343.jpg
http://static.bf2s.com/files/user/31874 … 180400.jpg
As you can see, the woofer is gone. UV rays.
So I went and bought some new ones!
http://static.bf2s.com/files/user/31874 … 183418.jpg
http://static.bf2s.com/files/user/31874 … 183433.jpg
And bingo! Like new (or so I am told)...eargasm! Huge bass...
The idea of any hi-fi system is to reproduce the source material as faithfully as possible, and to deliberately add distortion to everything you hear (due to amplifier deficiencies) because it sounds 'nice' is simply not high fidelity. If that is what you want to hear then there is no problem with that, but by adding so much additional material (by way of harmonics and intermodulation) you have a tailored sound system, not a hi-fi. - Rod Elliot, ESP
How much difference between RAM with DDR2 @ 800MHz and DDR3 @ 1066MHz?
Gonna make much difference? Same amount of both.
Gonna make much difference? Same amount of both.
The difference is going to be minimal; it may be unnoticeable.PrivateVendetta wrote:
How much difference between RAM with DDR2 @ 800MHz and DDR3 @ 1066MHz?
Gonna make much difference? Same amount of both.
It also depends on your processor - for example a Core i7 would have a bit more advantage when using DDR3 (not because of speed only, but architecture).
Last edited by alexb (2009-12-12 13:33:41)
Uhm no. 1066MHz is much better for overclocking the CPU.alexb wrote:
The difference is going to be minimal; it may be unnoticeable.PrivateVendetta wrote:
How much difference between RAM with DDR2 @ 800MHz and DDR3 @ 1066MHz?
Gonna make much difference? Same amount of both.
Correct, but only if he's going to overclock.Sydney wrote:
Uhm no. 1066MHz is much better for overclocking the CPU.alexb wrote:
The difference is going to be minimal; it may be unnoticeable.PrivateVendetta wrote:
How much difference between RAM with DDR2 @ 800MHz and DDR3 @ 1066MHz?
Gonna make much difference? Same amount of both.
Also, DDR3 has higher latencies than DDR2.
1066MHz = DDR2alexb wrote:
Correct, but only if he's going to overclock.Sydney wrote:
Uhm no. 1066MHz is much better for overclocking the CPU.alexb wrote:
The difference is going to be minimal; it may be unnoticeable.
Also, DDR3 has higher latencies than DDR2.
edit: Nvm, DDR3 can also be 1066MHz
Last edited by Sydney (2009-12-12 13:46:31)
?Sydney wrote:
1066MHz = DDR2alexb wrote:
Correct, but only if he's going to overclock.Sydney wrote:
Uhm no. 1066MHz is much better for overclocking the CPU.
Also, DDR3 has higher latencies than DDR2.
between DDR2 @ 800MHz and DDR3 @ 1066MHz
Well, then it's easy, DDR3 over DDR2 any day.
so my PC has been slow lately, especially on programs that rely a lot on the HDD...
I was thinking SSD - what are the good ones atm? I've gathered there's no real point in getting the lower end ones?
I was thinking SSD - what are the good ones atm? I've gathered there's no real point in getting the lower end ones?
loldefrag?
def rag?
Shit I forgot about that. brb.
Shit I forgot about that. brb.
Got new woofers (Energy). Also, you're right about the suspension--but for some reason they're back to normal now...Freezer7Pro wrote:
Did you get whole new woofers or did you refoam them? Anyhow, the suspension looks a bit ill-fit on the left (bottom in pic) sideTSI wrote:
So this summer I doscovered that my dad's 25-year old Sound Dynamics monitors were broken...and that he's kept using them.
http://static.bf2s.com/files/user/31874 … 180343.jpg
http://static.bf2s.com/files/user/31874 … 180400.jpg
As you can see, the woofer is gone. UV rays.
So I went and bought some new ones!
http://static.bf2s.com/files/user/31874 … 183418.jpg
http://static.bf2s.com/files/user/31874 … 183433.jpg
And bingo! Like new (or so I am told)...eargasm! Huge bass...
I like pie.
D:TSI wrote:
Got new woofers (Energy). Also, you're right about the suspension--but for some reason they're back to normal now...Freezer7Pro wrote:
Did you get whole new woofers or did you refoam them? Anyhow, the suspension looks a bit ill-fit on the left (bottom in pic) sideTSI wrote:
So this summer I doscovered that my dad's 25-year old Sound Dynamics monitors were broken...and that he's kept using them.
http://static.bf2s.com/files/user/31874 … 180343.jpg
http://static.bf2s.com/files/user/31874 … 180400.jpg
As you can see, the woofer is gone. UV rays.
So I went and bought some new ones!
http://static.bf2s.com/files/user/31874 … 183418.jpg
http://static.bf2s.com/files/user/31874 … 183433.jpg
And bingo! Like new (or so I am told)...eargasm! Huge bass...
Why didn't you refoam?!
The idea of any hi-fi system is to reproduce the source material as faithfully as possible, and to deliberately add distortion to everything you hear (due to amplifier deficiencies) because it sounds 'nice' is simply not high fidelity. If that is what you want to hear then there is no problem with that, but by adding so much additional material (by way of harmonics and intermodulation) you have a tailored sound system, not a hi-fi. - Rod Elliot, ESP