Well, I just got my raptors setup. Unfortunately i didnt test my old setup of the 7200 sata 3g's in raid.
HD Tach results for the 32mb test:
Raid 0, 36GB 16mb Raptors, 129.6 MB/s average 4% cpu usage
Standalone 250GB WD 3g 16mb, 53.0 MB/s 0% cpu usage
An interesting tid bit is the chart for the raptor held up until the last few gb... the chart for the 250gb sata started dropping faster about half way through, at 130gb.
HD Tach can be downloaded here..
http://www.simplisoftware.com/Public/in … est=HdTach
There seems to be way too much misinformation on this board reguarding harddrives.. so lets get some good hard facts started!
HD Tach results for the 32mb test:
Raid 0, 36GB 16mb Raptors, 129.6 MB/s average 4% cpu usage
Standalone 250GB WD 3g 16mb, 53.0 MB/s 0% cpu usage
An interesting tid bit is the chart for the raptor held up until the last few gb... the chart for the 250gb sata started dropping faster about half way through, at 130gb.
HD Tach can be downloaded here..
http://www.simplisoftware.com/Public/in … est=HdTach
There seems to be way too much misinformation on this board reguarding harddrives.. so lets get some good hard facts started!