Pages: 1

 

2006-07-29 12:43:17
stryyker
bad touch
+1,682|7022|California

i will be to the point. computer does not turn, but indicator LEDs on motherboard still show normal. all front panel connectors are plugged in, all power plugs are secured.

motherboard is DFi Lanparty UT
powersupply is Antec truepower 2.0 440W
2006-07-29 12:44:07
_j5689_
Dreads & Bergers
+364|7018|Riva, MD
It might be that the RAM went bad, or something else.
2006-07-29 13:17:55
fierce
I love [fiSh]
+167|6870
Any speaker sounds during system start?
Tried to reset the CMOS?
2006-07-29 13:22:07
stryyker
bad touch
+1,682|7022|California

ive reset the CMOS, but there is still no power, due to the fact it wont turn on
2006-07-29 13:26:52
Towelly
It's A State Of Mind
+399|6892|Your attic
Edit: got the wrong idea, ignore this and follow below

Last edited by Towelly (2006-07-29 13:31:04)

2006-07-29 13:27:02
Cybargs
Moderated
+2,285|7018
does all fans work? lights normal? if every fan is on its not PSU issue, its more likely a fried motherboard or dead ream
https://cache.www.gametracker.com/server_info/203.46.105.23:21300/b_350_20_692108_381007_FFFFFF_000000.png
2006-07-29 13:28:11
Stealth42o
She looked 18 to me officer
+175|6973
PSU is fine if you LED is up.  Could be one of many things.

Pull out your RAM and see if it post's.

Most likely it's your mobo.  Even if you RAM, cpu, etc was bad, the mobo would still post to BIOS.
2006-07-29 13:50:40
stryyker
bad touch
+1,682|7022|California

none of the one fans turns on
2006-07-29 13:56:29
Cybargs
Moderated
+2,285|7018

stryyker wrote:

none of the one fans turns on
PSU= dead
https://cache.www.gametracker.com/server_info/203.46.105.23:21300/b_350_20_692108_381007_FFFFFF_000000.png
2006-07-29 15:19:57
ts-madchild
Member
+5|7091
hey stryyker...

try following the DFI Proper Cmos Clear procedure to the letter as posted by Ex-Roadie @ dfi-street.com

Ive had the exact same issue and it worked for me.

LINK TO DFI's PROPER CMOS CLEAR

 

Pages: 1

Board footer

Privacy Policy - © 2025 Jeff Minard