FloppY_
­
+1,010|6501|Denmark aka Automotive Hell

alexb wrote:

The day I own and drive this... my life will be complete.

http://ntalekt.com/gliregistry/sites/de … %20GLI.jpg
Can't remember if that is called a Bora, Vento or just Polo sedan here...
­ Your thoughts, insights, and musings on this matter intrigue me
Cash 'N Prizes
we get in what we fit in 'round here
+18|5594|Toledo, Ohio
the heater core is shot in my car. I dont have the time or the money to fix it right now. how do i keep the windows from steaming up and freezing? also, how can i heat it?
Camm
Feeding the Cats.
+761|5183|Dundee, Scotland.

Cash 'N Prizes wrote:

the heater core is shot in my car. I dont have the time or the money to fix it right now. how do i keep the windows from steaming up and freezing? also, how can i heat it?

Cash 'N Prizes wrote:

how do i keep the windows from steaming up
Don't breathe

Cash 'N Prizes wrote:

freezing
Don't leave the windows open overnight.

Cash 'N Prizes wrote:

how can i heat it
Put the heaters on.
for a fatty you're a serious intellectual lightweight.
Cash 'N Prizes
we get in what we fit in 'round here
+18|5594|Toledo, Ohio
lol
heatercore is leaking.
hadit bypassed.
it doesnt get above 20 degrees here.
shit.
FloppY_
­
+1,010|6501|Denmark aka Automotive Hell

Cash 'N Prizes wrote:

lol
heatercore is leaking.
hadit bypassed.
it doesnt get above 20 degrees here.
shit.
Fireplace
­ Your thoughts, insights, and musings on this matter intrigue me
alexb
<3
+590|6155|Kentucky, USA

Cash 'N Prizes wrote:

lol
heatercore is leaking.
hadit bypassed.
it doesnt get above 20 degrees here.
shit.
It's more than likely clogged... if I'm not mistaken you can have a shop flush it out for very cheap.

EDIT - Nvm, if its cracked, its pointless.

Last edited by alexb (2011-02-09 18:42:20)

Cash 'N Prizes
we get in what we fit in 'round here
+18|5594|Toledo, Ohio

alexb wrote:

It's more than likely clogged... if I'm not mistaken you can have a shop flush it out for very cheap.

EDIT - Nvm, if its cracked, its pointless.
i had a pressure test done on it, because i thought it mightve been clogged and i was praying to god that it wasnt the goddamn heatercore, but it was. My car is a 20 year old volvo 240, so it makes sense i guess.
alexb
<3
+590|6155|Kentucky, USA

Cash 'N Prizes wrote:

alexb wrote:

It's more than likely clogged... if I'm not mistaken you can have a shop flush it out for very cheap.

EDIT - Nvm, if its cracked, its pointless.
i had a pressure test done on it, because i thought it mightve been clogged and i was praying to god that it wasnt the goddamn heatercore, but it was. My car is a 20 year old volvo 240, so it makes sense i guess.
Did they give you a quote? Tbh you could do it yourself, theres lots of DIY guides on the internet.
FloppY_
­
+1,010|6501|Denmark aka Automotive Hell

Cash 'N Prizes wrote:

alexb wrote:

It's more than likely clogged... if I'm not mistaken you can have a shop flush it out for very cheap.

EDIT - Nvm, if its cracked, its pointless.
i had a pressure test done on it, because i thought it mightve been clogged and i was praying to god that it wasnt the goddamn heatercore, but it was. My car is a 20 year old volvo 240, so it makes sense i guess.
I'm afraid you are mistaken then.. Volvo 240's do not break...
­ Your thoughts, insights, and musings on this matter intrigue me
Cash 'N Prizes
we get in what we fit in 'round here
+18|5594|Toledo, Ohio

alexb wrote:

Did they give you a quote? Tbh you could do it yourself, theres lots of DIY guides on the internet.
yeah they said it would cost me around $900. And i have looked up how to do it, and there are some pretty detailed guides on how to. However, i dont have 900 bucks laying around, and i dont have the time/ heated garage to do it.



FloppY_ wrote:

I'm afraid you are mistaken then.. Volvo 240's do not break...
oh they do. dont get me wrong, i love the car to death, even if it is slow as shit. a 4000 lb. car with a 4 cyl. engine.
FloppY_
­
+1,010|6501|Denmark aka Automotive Hell

Cash 'N Prizes wrote:

alexb wrote:

Did they give you a quote? Tbh you could do it yourself, theres lots of DIY guides on the internet.
yeah they said it would cost me around $900. And i have looked up how to do it, and there are some pretty detailed guides on how to. However, i dont have 900 bucks laying around, and i dont have the time/ heated garage to do it.



FloppY_ wrote:

I'm afraid you are mistaken then.. Volvo 240's do not break...
oh they do. dont get me wrong, i love the car to death, even if it is slow as shit. a 4000 lb. car with a 4 cyl. engine.
No sir, you are mistaken... Volvo 240's are indeed so strong they are considered to be the strongest material known to man
­ Your thoughts, insights, and musings on this matter intrigue me
Cash 'N Prizes
we get in what we fit in 'round here
+18|5594|Toledo, Ohio

FloppY_ wrote:

No sir, you are mistaken... Volvo 240's are indeed so strong they are considered to be the strongest material known to man
i got backed into at a gas station about 2 years ago, this fat bitch put a dent the size of a basketball in my corner panel, her bumper and rear tail light assembly were completely gone lol.


if theyre the strongest material, shouldnt we make plaes out of 240s?
alexb
<3
+590|6155|Kentucky, USA

Cash 'N Prizes wrote:

alexb wrote:

Did they give you a quote? Tbh you could do it yourself, theres lots of DIY guides on the internet.
yeah they said it would cost me around $900. And i have looked up how to do it, and there are some pretty detailed guides on how to. However, i dont have 900 bucks laying around, and i dont have the time/ heated garage to do it.
Close garage and buy space heater / portable heater for profit.
Also, the part itself shouldn't be $900 - that probably includes labor which they always charge out the ass for.
FloppY_
­
+1,010|6501|Denmark aka Automotive Hell

Cash 'N Prizes wrote:

FloppY_ wrote:

No sir, you are mistaken... Volvo 240's are indeed so strong they are considered to be the strongest material known to man
i got backed into at a gas station about 2 years ago, this fat bitch put a dent the size of a basketball in my corner panel, her bumper and rear tail light assembly were completely gone lol.


if theyre the strongest material, shouldnt we make plaes out of 240s?
Planes?
That sadly will not work since each 240 is as aerodynamic as a parachute and as heavy as, well, a Volvo...

Plates?
That sadly will not work either since a plate of 240s will only be as strong as the material used to connect each 240

Last edited by FloppY_ (2011-02-09 19:08:42)

­ Your thoughts, insights, and musings on this matter intrigue me
RTHKI
mmmf mmmf mmmf
+1,741|6952|Oxferd Ohire
i think he meant planets
https://i.imgur.com/tMvdWFG.png
Cash 'N Prizes
we get in what we fit in 'round here
+18|5594|Toledo, Ohio

FloppY_ wrote:

Planes?
That sadly will not work since each 240 is as aerodynamic as a parachute and as heavy as, well, a Volvo...

Plates?
That sadly will not work either since a plate of 240s will only be as strong as the material used to connect each 240
open for interpretation my friend


alexb wrote:

Close garage and buy space heater / portable heater for profit.
Also, the part itself shouldn't be $900 - that probably includes labor which they always charge out the ass for..
yeah, its for the labor. and yes, labor prices are usually way too high, but its a labor intensive repair. and ill look into some space heaters, not a bad idea.
Reciprocity
Member
+721|6796|the dank(super) side of Oregon

Cash 'N Prizes wrote:

yeah they said it would cost me around $900. And i have looked up how to do it, and there are some pretty detailed guides on how to. However, i dont have 900 bucks laying around, and i dont have the time/ heated garage to do it.
be sure they check for electrolysis.  If your cooling system is electrically compromised you'll burn through that brand new core in about a month.
TSI
Cholera in the time of love
+247|6196|Toronto

FloppY_ wrote:

alexb wrote:

The day I own and drive this... my life will be complete.

http://ntalekt.com/gliregistry/sites/de … %20GLI.jpg
Can't remember if that is called a Bora, Vento or just Polo sedan here...
Bora.

Also: I own a '00 Jetta which has been partly modded to GLi spec. Absolute blast. If only it were awd...
I like pie.
alexb
<3
+590|6155|Kentucky, USA

TSI wrote:

FloppY_ wrote:

alexb wrote:

The day I own and drive this... my life will be complete.

http://ntalekt.com/gliregistry/sites/de … %20GLI.jpg
Can't remember if that is called a Bora, Vento or just Polo sedan here...
Bora.

Also: I own a '00 Jetta which has been partly modded to GLi spec. Absolute blast. If only it were awd...
Nice... got any pictures to share? I absolutely love to drive mine... the acceleration, handling, brakes... everything is perfect.

Last edited by alexb (2011-02-10 17:18:04)

TSI
Cholera in the time of love
+247|6196|Toronto
I wish I had...I'm afriad I only have interior shots from when i was doing some electrical work. I'll take some when I get home next week.
I like pie.
Toilet Sex
one love, one pig
+1,775|6787

alexb wrote:

everything is perfect.
compared to?
Hurricane2k9
Pendulous Sweaty Balls
+1,538|5917|College Park, MD

Toilet Sex wrote:

alexb wrote:

everything is perfect.
compared to?
https://i51.tinypic.com/14obn1k.jpg
https://static.bf2s.com/files/user/36793/marylandsig.jpg
FatherTed
xD
+3,936|6715|so randum
daddys getting an a5 for his next company car \o/
Small hourglass island
Always raining and foggy
Use an umbrella
Toilet Sex
one love, one pig
+1,775|6787

saudis in audis
SEREMAKER
BABYMAKIN EXPERT √
+2,187|6783|Mountains of NC

picked up a 2007 ford explorer limited on Wed with 31,000 miles under the hood for a nice $13,000 out the door
https://static.bf2s.com/files/user/17445/carhartt.jpg

Board footer

Privacy Policy - © 2024 Jeff Minard