Beep codes on new build.

2009-03-21 16:37:34

#1

pirate7474: Oh noes!; +11|6262|USA

Hey BF2S,

I just got my first build and finished building all of it today. When I boot up it isn't posting and is giving a beep code. Also, somehow my monitor doesn't really work. The light doesn't turn orange when I push it, it only flashes orange and nothing else happens.

For the monitor, it's a 22" Acer monitor.

My beep code is 2 short beeps, the site says it's some sort of memory error. I have tried each stick individually and it still beeps. Also, I have a fancy LED on my board and it stops when it reaches 85. Don't know if that helps or not.

http://www.foxconnchannel.com/en-us/sup … -gb0000080

This is my build:
AMD Phenom II 720 BE
Foxconn A79A-S
2 x 2 GB 800 MHz G Skill Pi Black RAM
MSI Radeon 4830
WD Caviar Blue 500GB
Raidmax 530W PSU
Cooler Master Centurion 5
Freezer 64 Pro

It's pretty nice so far except for the beeping. Any ideas?

Thanks.

2009-03-21 16:38:55

#2

Stimey: +786|6383|Ontario | Canada

Have any other memory lying around? If so test that.
It could be that both DIMMs are fried.

2009-03-21 16:54:10

#3

Catbox: forgiveness; +505|6979

try 1 stick at a time of memory...
and does your graphics card have the pci power connector plugged in...?

Love is the answer

2009-03-21 17:32:26

#4

Little BaBy JESUS: m8; +394|6411|'straya

Try both of those^ also double check power (and cpu) connectors to motherboard?

Last edited by Little BaBy JESUS (2009-03-21 17:32:42)

2009-03-21 17:42:57

#5

Phatmatt: Vroom Vroom; +298|6452|Canada

for the led display, look into your owners manual. it should say something about the error codes.

2009-03-21 20:45:34

#6

pirate7474: Oh noes!; +11|6262|USA

The manual doesn't have anything like that. It just explains what to do, and the various software that came bundled.

I'll double check the power, and I don't have any machines with DDR2 support or any DDR2 memory laying around. Kinda sucks.

EDIT: I FAIL. More like my monitor fails. The cable is REALLY loose and it keeps on unplugging itself.

Last edited by pirate7474 (2009-03-21 20:52:02)

2009-03-21 22:07:25

#7

TopHat01: Limitless; +117|6167|CA

pirate7474 wrote:
EDIT: I FAIL. More like my monitor fails. The cable is REALLY loose and it keeps on unplugging itself.

So it was the monitor?

Check out my YouTube channel

2009-03-22 01:34:46

#8

_Dominiko_PL: TITS or gtfo.; +97|6784|Polish state of EU

the monitor cable cant start BIOS beep error codes i think...

2009-03-22 13:40:05

#9

pirate7474: Oh noes!; +11|6262|USA

The cable was loose and it just didn't power on at all.

Anyways everything's running fine and I have the OB installed and stuff. Going to play some TF2 now.

Thanks.

2009-03-22 13:41:30

#10

Finray: Hup! Dos, Tres, Cuatro; +2,629|6051|Catherine Black

No problem?

2009-03-22 14:16:42

#11

Scorpion0x17: can detect anyone's visible post count...; +691|7028|Cambridge (UK)

Aaaaand... relax.

BF2S Forums Beep codes on new build.

pirate7474 wrote:

Board footer