urgent Heatsink help

2008-11-29 22:38:40

#1

Little BaBy JESUS: m8; +394|6414|'straya

Ok. so im installing my OCZ vendetta 2 CPU cooler on my e8400 CPU, P5Q Pro mother board...

and we got 3 of the push pins in.... but the final one wont go in no matter how much we push.... it just wont click.

we tried the Heatsink in several directions.

It is like this currently.

https://i192.photobucket.com/albums/z43/howdoulikemen0w/ll001-1.jpg

https://i192.photobucket.com/albums/z43/howdoulikemen0w/ll002-1.jpg

So... any suggestions? what do we do???

Quick help would be appreciated so we can continue build.

2008-11-29 22:51:28

#2

Cheez: Herman is a warmaphrodite; +1,027|6704|King Of The Islands

It's not big enough.

My state was founded by Batman. Your opinion is invalid.

2008-11-29 23:00:14

#3

Little BaBy JESUS: m8; +394|6414|'straya

Cheez wrote:
It's not big enough.

Not helpful.

2008-11-29 23:02:47

#4

AussieReaper: ( ͡° ͜ʖ ͡°); +5,761|6418|what

Scan in the instructions and post the image so we can see what your doing wrong.

2008-11-29 23:03:27

#5

Little BaBy JESUS: m8; +394|6414|'straya

TheAussieReaper wrote:
Scan in the instructions and post the image so we can see what your doing wrong.

well i dont have a scanner.

2008-11-29 23:12:09

#6

AussieReaper: ( ͡° ͜ʖ ͡°); +5,761|6418|what

Are you sure that the cooler is compatible with that motherboard?

2008-11-29 23:13:41

#7

Little BaBy JESUS: m8; +394|6414|'straya

TheAussieReaper wrote:
Are you sure that the cooler is compatible with that motherboard?

Yes.

Ok we did it... it took 3 people with pressure in the right area and it worked.

2008-11-29 23:14:32

#8

AussieReaper: ( ͡° ͜ʖ ͡°); +5,761|6418|what

Cool. How much has that system cost you btw?

2008-11-29 23:25:39

#9

GC_PaNzerFIN: Work and study @ Technical Uni; +528|6680|Finland

u guys remembered to push the opposite pins in first? like: up left -> down right ?

it really doesn't need much force when u do it right.

Last edited by GC_PaNzerFIN (2008-11-29 23:27:19)

3930K | H100i | RIVF | 16GB DDR3 | GTX 480 | AX750 | 800D | 512GB SSD | 3TB HDD | Xonar DX | W8

2008-11-30 00:48:29

#10

TimmmmaaaaH: Damn, I... had something for this; +725|6705|Brisbane, Australia

Cheez wrote:
It's not big enough.

I thought mine was big

https://img368.imageshack.us/img368/7237/photo7or7.jpg

It looks quite normal really, in comparison. What case are you using? Cause the side of my P182 only just fits on (like hardly 1cm of clearance).

https://bf3s.com/sigs/5e6a35c97adb20771c7b713312c0307c23a7a36a.png

2008-11-30 00:57:11

#11

TheDonkey: Eat my bearrrrrrrrrrr, Tonighttt; +163|5982|Vancouver, BC, Canada

Srsly?

Does the far outer end of the heatsink even get WARM, like AT ALL!?! I cannot possibly see how something that big can have too much more cooling power than something half the size, sure, more surface area is bigger, but there comes a point when it doesn't matter how much surface area you have, it just won't be utilized.

That coming from someone who's proud of his .30Ghz OC, and buys the cheapest possible mobo/CPU

But seriously, I cannot see how heat can physically get that far, even on a 4.00Ghz E8400

2008-11-30 01:08:23

#12

CrazeD: Member; +368|6938|Maine

TheDonkey wrote:
But seriously, I cannot see how heat can physically get that far, even on a 4.00Ghz E8400

Copper heatpipes.

2008-11-30 01:13:01

#13

Little BaBy JESUS: m8; +394|6414|'straya

TimmmmaaaaH wrote:
Cheez wrote:
It's not big enough.
I thought mine was big

http://img368.imageshack.us/img368/7237/photo7or7.jpg

It looks quite normal really, in comparison. What case are you using? Cause the side of my P182 only just fits on (like hardly 1cm of clearance).

Im also running a P182 Case. and theres.... just enough clearance JUUUSSSSTTTTT

TheAussieReaper wrote:
Cool. How much has that system cost you btw?

Cost about $2300 AUD. e8400, P5Q Pro, Vendetta Cooler, OCZ 1066 Mhz Reaper RAM, dvd drive, 750 GB harddrive, 1Gb 4870, P182 etc etc. im happy

2008-11-30 01:28:46

#14

FatherTed: xD; +3,936|6766|so randum

1 GB 4870

Small hourglass island
Always raining and foggy
Use an umbrella

2008-11-30 01:32:06

#15

AussieReaper: ( ͡° ͜ʖ ͡°); +5,761|6418|what

FatherTed wrote:
1 GB 4870

You really notice the huge improvement when playing on a CRT monitor at 800 x 600 16bit colour.

2008-11-30 01:34:16

#16

FatherTed: xD; +3,936|6766|so randum

TheAussieReaper wrote:
FatherTed wrote:
1 GB 4870
You really notice the huge improvement when playing on a CRT monitor at 800 x 600 16bit colour.

i noticed a slight upgrade going from a 7200/7300SE to a 512mb HD4850.

Don't know why tho

Small hourglass island
Always raining and foggy
Use an umbrella

2008-11-30 02:18:52

#17

TimmmmaaaaH: Damn, I... had something for this; +725|6705|Brisbane, Australia

Little BaBy JESUS wrote:
TimmmmaaaaH wrote:
Cheez wrote:
It's not big enough.
I thought mine was big

http://img368.imageshack.us/img368/7237/photo7or7.jpg

It looks quite normal really, in comparison. What case are you using? Cause the side of my P182 only just fits on (like hardly 1cm of clearance).
Im also running a P182 Case. and theres.... just enough clearance JUUUSSSSTTTTT

TheAussieReaper wrote:
Cool. How much has that system cost you btw?
Cost about $2300 AUD. e8400, P5Q Pro, Vendetta Cooler, OCZ 1066 Mhz Reaper RAM, dvd drive, 750 GB harddrive, 1Gb 4870, P182 etc etc. im happy

Oh nice. similar to mine I got about a week ago.

4gb platinum OCZ, e8500, 640gb hdd, 512mb 4870, p182, noctua u12-p, p5q pro.

~$1600.

Last edited by TimmmmaaaaH (2008-11-30 02:19:22)

2008-11-30 06:32:56

#18

ghettoperson: Member; +1,943|6915

I hate push pins.

2008-11-30 08:29:12

#19

Brasso: member; +1,549|6896

FatherTed wrote:
1 GB 4870

this, coming soon, with this, this, and two of these.

, and i know i AM right.

"people in ny have a general idea of how to drive. one of the pedals goes forward the other one prevents you from dying"

2008-11-30 13:13:07

#20

SonderKommando: Eat, Lift, Grow, Repeat....; +564|6925|The darkside of Denver

ghettoperson wrote:
I hate push pins.

haha, I made a poll after the frustration of installing my F7P on my mobo and new chip a few months back. Damn if you dont get them on good on your first attempt, you're in world of hurt. It will seriously take a fucking UN resolution to keep you from seriously raining down a world of destruction upon this ill-fangled device.

Jesus, if you havent gotten it on yet.. take it off.... start over. position it in place. Then steadily push and turn into place the top left pin. Then the bottom right, and vise versa. try not to put any force on the HSF assembly as this could and will dislodge any of the previously secured little fuckers. GL, and godspeed.

BTW, why does it face up? fan should be blowing towards outtake fan, amirite?

ps. Sweet fucking rig man.

Last edited by <SS>SonderKommando (2008-11-30 13:16:51)

2008-11-30 13:49:05

#21

jaymz9350: Member; +54|6843

<SS>SonderKommando wrote:
BTW, why does it face up? fan should be blowing towards outtake fan, amirite?

ps. Sweet fucking rig man.

depends on the case, if it's a antec 900 or cm690 or some others they have exhausts at the top as well.

2008-11-30 14:20:11

#22

CrazeD: Member; +368|6938|Maine

You don't have to turn the pins. You turn them to unlock them, but to install you just turn them initially to "reset" them, and then just push until it clicks. It's easy as hell, I dunno why everyone bitches about them. Takes literally 30 seconds, if that.

2008-11-30 14:22:13

#23

GC_PaNzerFIN: Work and study @ Technical Uni; +528|6680|Finland

CrazeD wrote:
You don't have to turn the pins. You turn them to unlock them, but to install you just turn them initially to "reset" them, and then just push until it clicks. It's easy as hell, I dunno why everyone bitches about them. Takes literally 30 seconds, if that.

QFT

3930K | H100i | RIVF | 16GB DDR3 | GTX 480 | AX750 | 800D | 512GB SSD | 3TB HDD | Xonar DX | W8

2008-11-30 14:39:33

#24

max: Vela Incident; +1,652|6833|NYC / Hamburg

I prefer screws but

GC_PaNzerFIN wrote:
CrazeD wrote:
You don't have to turn the pins. You turn them to unlock them, but to install you just turn them initially to "reset" them, and then just push until it clicks. It's easy as hell, I dunno why everyone bitches about them. Takes literally 30 seconds, if that.
QFT

_{once upon a midnight dreary, while i pron surfed, weak and weary, over many a strange and spurious site of ' hot xxx galore'. While i clicked my fav'rite bookmark, suddenly there came a warning, and my heart was filled with mourning, mourning for my dear amour, " 'Tis not possible!", i muttered, " give me back my free hardcore!"..... quoth the server, 404.}

2008-11-30 15:26:32

#25

Defiance: Member; +438|6936

It's not so bad if you read the directions and get some bearings with the finicky little bastards, but in the case of a new build some simple screws would be great.

BF2S Forums urgent Heatsink help

Cheez wrote:

TheAussieReaper wrote:

TheAussieReaper wrote:

Cheez wrote:

TheDonkey wrote:

TimmmmaaaaH wrote:

Cheez wrote:

TheAussieReaper wrote:

FatherTed wrote:

TheAussieReaper wrote:

FatherTed wrote:

Little BaBy JESUS wrote:

TimmmmaaaaH wrote:

Cheez wrote:

TheAussieReaper wrote:

FatherTed wrote:

ghettoperson wrote:

<SS>SonderKommando wrote:

CrazeD wrote:

GC_PaNzerFIN wrote:

CrazeD wrote:

Board footer