rdx-fx wrote:
DefCon-17 wrote:
What I got so far:
http://eagleeyez.deviantart.com/art/M4- … 0-76623562What I want to know in particular:
Is the size of the flashlight/laser roughly correct in relation to the gun?
Besides a scope, what else could I add to it?
Anything wrong that stands out?
Definitely an M4. Can tell there's alot of work put into it.
Now, for the bits that look off:
* pistol grip needs to have more curvature in the back.
* forward assist needs to be blended into the upper receiver more (fillet)
* ejection port cover is at the wrong angle. On long axis (back to front) it's at 90°. should be more like 75°.
* Trigger group pins protruding through lower receiver are in the wrong positions
* raised metal around the magazine release is the wrong size
* charging handle is too small
* body of the upper receiver (cylinder of the main body, along the center axis) too small of a diameter
* magazine release button too small (but correct proportions)
* where the upper receiver mates to the lower, you missed the curve at the rear (about 1" forward of where the stock meets the receiver)
(to anyone that hasn't spent a huge amount of time 'wearing' an M4/M16/AR15, the model you have is indistinguishable though)
http://www.colt.com/mil/downloads.asphas some images that may help you out.
here, this may help too;
http://www.vlar.net/bf2s/DeathStar.Desktop.jpg(Note: those are
not the originals. Army drawings are in Pro/E, and covered by NDA)
for solid models, and some blueprints:
http://www.cncguns.com/downloads.htmlfor a good blueprint of the lower receiver:
http://www.biggerhammer.net/ar15/cad/ar15_receiver.pdfanimations of the workings, *.mov format animations from the Army, etc:
http://www.biggerhammer.net/ar15/cad/
