Just got an E6600, for $218

2006-12-26 19:00:43

#1

CommieChipmunk: Member; +488|6853|Portland, OR, USA

Okay, so I've been planning on getting this processor for a while and today I decided to take the 10 minutes to drive to Fry's. So I get there, and there was one of the Fry guys talking with another customer about a deal they had to day. You get some ESC piece of shit motherboard and an E6600 for $298 (only like 11 bucks less than their normal price). But that ESC mobo is worth $119.99 (I think that it's SLi too!)

So I've decided I'm going to sell the mobo on Ebay or something starting at $50 plus S & H, or I may use it in a new computer build I'm doing for my dad. But anyway, I will eventually make money out of the whole ordeal.. I was pretty stoked...

So if any of you live near a Fry's and are looking into getting an E6600, get your ass down there!

EDIT:

http://www.newegg.com/Product/Product.a … 6813135022

there's the mobo, heh, it a lot cheaper on Newegg...

Last edited by CommieChipmunk (2006-12-26 19:03:58)

2006-12-26 21:01:04

#2

Jbrar: rawr; +86|6825|Winterpeg, Canada

I actually looked at a board by ECS last week, if this is the same one, the pci-e slots only go up to 8x, (even with a single gpu). So it's sli or nothing.

2006-12-26 21:03:18

#3

CommieChipmunk: Member; +488|6853|Portland, OR, USA

Jbrar wrote:
I actually looked at a board by ECS last week, if this is the same one, the pci-e slots only go up to 8x, (even with a single gpu). So it's sli or nothing.

Baaaah don't look at ECS! It is crap!

Even the salesmen from Fry's said that it is pretty much shit, and they are really not supposed to do that.. ever.

2006-12-26 21:04:57

#4

Jbrar: rawr; +86|6825|Winterpeg, Canada

I would never buy anything with a bad review, I ended up picking out the Asus P5B-E, not sli, but my 7950 should be good on it's own until some new dx10 cards come out.

2006-12-26 21:40:54

#5

theknuck: It's pronounced Knuck, like in Knuckle!!; +45|6895|balls

wtf is a fry's?

2006-12-26 21:46:04

#6

ssj3barua: Member; +55|6972|Indianapolis, IN, U.S.

Fry's electronics. Its like Best Buy, only better.

2006-12-26 21:46:29

#7

[1stSSF]=Nuka=: Banned; +23|7033|PDX Metro Area, OR, US, SOL

theknuck wrote:
wtf is a fry's?

Fry's is the quintessential US geek store...it started out as a supermarket chain the San Francisco Bay Area...and as Silicon Valley emerged, Fry's began to cater to the computer geeks...eventually all but leaving food behind (unless various candies and sodas can be considered "food") and becoming the store that caters to geeks of all stripes...

2006-12-26 21:55:53

#8

GotMex?: $623,493,674,868,715.98 in Debt; +193|7046

A quick search on ebay shows the average selling price of that ECS board is about 40 bucks. A nice little 40 dollar discount would be nice on a E6600 considering all you have to do is sell the board on eBay and ship it. Nice find.

2006-12-26 22:10:31

#9

Cybargs: Moderated; +2,285|7000

Jbrar wrote:
I actually looked at a board by ECS last week, if this is the same one, the pci-e slots only go up to 8x, (even with a single gpu). So it's sli or nothing.

Are you on crack? You can run a single GPU and the PCI-E bus will run at 16x...

https://cache.www.gametracker.com/server_info/203.46.105.23:21300/b_350_20_692108_381007_FFFFFF_000000.png

2006-12-26 22:12:12

#10

CommieChipmunk: Member; +488|6853|Portland, OR, USA

cyborg_ninja-117 wrote:
Jbrar wrote:
I actually looked at a board by ECS last week, if this is the same one, the pci-e slots only go up to 8x, (even with a single gpu). So it's sli or nothing.
Are you on crack? You can run a single GPU and the PCI-E bus will run at 16x...

yeah but the board is still shit...

2006-12-26 22:15:31

#11

Cybargs: Moderated; +2,285|7000

CommieChipmunk wrote:
cyborg_ninja-117 wrote:
Jbrar wrote:
I actually looked at a board by ECS last week, if this is the same one, the pci-e slots only go up to 8x, (even with a single gpu). So it's sli or nothing.
Are you on crack? You can run a single GPU and the PCI-E bus will run at 16x...
yeah but the board is still shit...

Make an overclocking video of it. OVERCLOCK TILL IT DIES YEAAAAAAAAAAAH!

2006-12-26 22:16:44

#12

CommieChipmunk: Member; +488|6853|Portland, OR, USA

cyborg_ninja-117 wrote:
CommieChipmunk wrote:
cyborg_ninja-117 wrote:

Are you on crack? You can run a single GPU and the PCI-E bus will run at 16x...
yeah but the board is still shit...
Make an overclocking video of it. OVERCLOCK TILL IT DIES YEAAAAAAAAAAAH!

lol, I dont want to run the risk of fucking up an E6600...

2006-12-26 22:19:11

#13

Cybargs: Moderated; +2,285|7000

CommieChipmunk wrote:
cyborg_ninja-117 wrote:
CommieChipmunk wrote:

yeah but the board is still shit...
Make an overclocking video of it. OVERCLOCK TILL IT DIES YEAAAAAAAAAAAH!
lol, I dont want to run the risk of fucking up an E6600...

Worst case scenario is that only the board will fry, the CPU's are pretty strong and can reach around 3.4ghz...

2006-12-26 22:22:27

#14

Reciprocity: Member; +721|6864|the dank(super) side of Oregon

I paid $310. I't still a helluva good price for one of the fastest chips around.

2006-12-26 22:24:00

#15

CommieChipmunk: Member; +488|6853|Portland, OR, USA

cyborg_ninja-117 wrote:
CommieChipmunk wrote:
cyborg_ninja-117 wrote:

Make an overclocking video of it. OVERCLOCK TILL IT DIES YEAAAAAAAAAAAH!
lol, I dont want to run the risk of fucking up an E6600...
Worst case scenario is that only the board will fry, the CPU's are pretty strong and can reach around 3.4ghz...

I see... Well the thing only cost me like -20 dollars.. lol

BF2S Forums Just got an E6600, for $218

Jbrar wrote:

theknuck wrote:

Jbrar wrote:

cyborg_ninja-117 wrote:

Jbrar wrote:

CommieChipmunk wrote:

cyborg_ninja-117 wrote:

Jbrar wrote:

cyborg_ninja-117 wrote:

CommieChipmunk wrote:

cyborg_ninja-117 wrote:

CommieChipmunk wrote:

cyborg_ninja-117 wrote:

CommieChipmunk wrote:

cyborg_ninja-117 wrote:

CommieChipmunk wrote:

cyborg_ninja-117 wrote:

Board footer