Pentium D 820 and only 1 is being recognized.
Asus p5nd2-sli mobo
corsair xms2 2x1gb ddr2-667
Asus p5nd2-sli mobo
corsair xms2 2x1gb ddr2-667
Last edited by ShellShock.PwN (2006-11-25 09:24:08)
Can you not see the two cores in the device manager or in the performance tab of thee Windows Task Manager?
nope only 1
im starting to think i fried 1 of them if its even possible
No you didn't kill one of the cores because the whole processor would stop working altogether. Its a problem with your motherboard. You might have to update the bios in the board because some boards were not built with support for dual core processors.
lol
in task manager click view > cpu history > one graph per cpu
As for your hardware - check system info to see if its detecting it
if not it must be a bios issue
in task manager click view > cpu history > one graph per cpu
As for your hardware - check system info to see if its detecting it
if not it must be a bios issue
up date bios ond or reinstall the drivers 4 your CPU
anyone know how to boot in dos?
You need to get a DOS boot disk. I know a site where you can get one.
http://www.bootdisk.com/
http://www.bootdisk.com/
yea i got one but iits being gay and wen i try to load the awdflash it says drive read error or some shit so i jsut gave up.
In the bios I think you can choose whether it use both or both as one.ShellShock.PwN wrote:
Pentium D 820 and only 1 is being recognized.
Asus p5nd2-sli mobo
corsair xms2 2x1gb ddr2-667
unless im blind i dont think you can
looked in bios didnt see anything but if there is a hidden message or something let me know
That hidden message is "This core will be held hostage until payment is received behind the hot water pipes at the train station"
i honestly wouldnt doubt it. fucking computers
take it to a computer store get them to fix it / replace the processer with a new on thats the exact smae
He could probably do it himself for free.doc. josh wrote:
take it to a computer store get them to fix it / replace the processer with a new on thats the exact smae
He could also void the warrenty(If its a pre-built computer) and screw himself if a real problem came to be.
its such an easy problem to fix but its being retarded. i have the boot disk,but when i put the 2nd floppy in it says data read error when i try to start awdflash. if im doing sometihng wrong tell me now b4 i throw it out the window
This is because NForce4 does NOT support the intel 820 chip.
I had a P5ND2-SLI Deluxe board with the 820 and also only had one core show up.
Nvidia thought "if youre buying a high end board, you shouldnt buy a low end chip" so they didnt put in full support for that chip.
Youll either need to run it at one core, get a different chip (830 works, 920 works, 805 works (for some dumb reason)) or my favorite, ditch that POS board and get something thats not based on an Nvidia chipset.. that board was HORRIBLE..
Heres one article on it.
http://www.xbitlabs.com/news/cpu/displa … 54105.html
I had a P5ND2-SLI Deluxe board with the 820 and also only had one core show up.
Nvidia thought "if youre buying a high end board, you shouldnt buy a low end chip" so they didnt put in full support for that chip.
Youll either need to run it at one core, get a different chip (830 works, 920 works, 805 works (for some dumb reason)) or my favorite, ditch that POS board and get something thats not based on an Nvidia chipset.. that board was HORRIBLE..
Heres one article on it.
http://www.xbitlabs.com/news/cpu/displa … 54105.html
Last edited by 99Ram2500 (2006-11-26 19:25:55)
Well that is odd because I'm running a dual core processor on an Asus P5N32 motherboard and its an nForce4 board.
Last edited by DeCon_1 (2006-11-26 19:24:04)
it was b/c of my xfi-card, some guy had the same problem. It worked, but now i get a disk read error when i try to start up. i love it
Which error are you getting?
i dont think he would be posting here if he could fix it himself dude.ryan_14 wrote:
He could probably do it himself for free.doc. josh wrote:
take it to a computer store get them to fix it / replace the processer with a new on thats the exact smae
The exact wording is
" A Disk Read Error Occured Press Ctrl+Alt+Delete to Restart"
i found the solution on some overclocker site and they said it was the sound card drivers messing with it, i tried it and it worked, i had to change the folder name in regdeit to put an "a" in front of it but i forgot to change it back after i flashed the bios. so im thinking thats it. i would just throw in the xp disc but i dont have the xp disc handy. so i got a feeling im sol until i get it.
" A Disk Read Error Occured Press Ctrl+Alt+Delete to Restart"
i found the solution on some overclocker site and they said it was the sound card drivers messing with it, i tried it and it worked, i had to change the folder name in regdeit to put an "a" in front of it but i forgot to change it back after i flashed the bios. so im thinking thats it. i would just throw in the xp disc but i dont have the xp disc handy. so i got a feeling im sol until i get it.