Pages: 1

 

  • Index » 
  • Community » 
  • Tech » 
  • Intel Raid Controller card and Onboard Raid, working in conjunction?
2012-06-06 19:20:57
Computer_Guy
Member
+54|6944
I recently bought  the Intel Raid Card (SASMF8I) and windows home server.

Specs
Asus P5E X38
4gb ram
Q9650
4x 2TB Raid 5 array.
1x 500GB Main Hdd for OS

I got WHS installed on the 500gb harddrive and everything works fine, it sees my current onboard raid. So then I go into the raid configuration utility for the raid card as the computer boots up and enable 2x 2tb harddrives that I have connectedt. Once I do that and reboot, it completely bypasses the onboard sata configuration and the intel raid screen for the onboard doesn't pop up any more. I go into the bios to check and to see if I can boot fromt he 500GB but it only sees the harddrives connected to the raid card.

What can I do to get both working? Or should I return the card and pick something else up?

UPDATE:

I tried removing the card and it automatically defaults back to the 500gb. Then I plugged the raidcard back in and same problem still occurs; my onboard controller doesnt  show up in the load screen nor do my drives show up in the bios.

I tried cleaing the cmos, unplugged the raid card to make sure my raid 5 is still there(it is) and made sure that my 500gb booted properly. Plugged the raid card back in and still doesn't work.

Last edited by Computer_Guy (2012-06-07 14:54:27)

2012-06-11 19:57:16
Computer_Guy
Member
+54|6944
Update: Checked bios and Firmware.

My BIOS is updated to the current one and I tried updating the firmware but I wasn't too sure since it wanted to me to use EFI in the BIOS. I went and put the card in a P8P67 mobo and tried doing what the instuctions said: go into bios, boot the usb with firmware file on it using the efi boot in bios; I wasn't to sure on what I was doing, and I tried a few things to get the thing to work and in the end I made no progress.



I've been searching to see if anyone else has had the problem and I've found one other. He never got it working on the X38 platform and when he upgraded to the X58 platform, he could get the onboard working in conjunction with the raid card, so he could have two raid  arrays going. While I was trying to update the firmware, I setup a raid 1 array with two harddrives on the card to see if it would work with the onboard controller, and it did! I could see both the onboard harddrives and the controller array, But I didn't have a raid array on the onboard when they both worked in conjunction. Which is fine since on my X38 platform it wouldn't even recognize the onboad once I got a raid array going on the card. So now, I'm just going to wait until I have money to get a new mobo/cpu/ram, in addition to the harddrives that I plan on using for the raid card.

Last edited by Computer_Guy (2012-06-11 19:59:59)

2012-06-12 05:34:48
steelie34
pub hero!
+603|6628|the land of bourbon
why would you want to enable both RAID controllers?
https://bf3s.com/sigs/36e1d9e36ae924048a933db90fb05bb247fe315e.png
2012-06-12 08:28:23
Computer_Guy
Member
+54|6944
For more harddrives. Since my onboard is full and I wanted to add more harddrives for another raid 5.

 

Pages: 1

  • Index » 
  • Community » 
  • Tech » 
  • Intel Raid Controller card and Onboard Raid, working in conjunction?

Board footer

Privacy Policy - © 2024 Jeff Minard