Slayer
---hates you
+1,137|7048|Hell, p.o box 666

Update: I will bring my rig to the dealer in about one hour. My BMWs sixpack is started and ready for full throttle.

I was talking to a technican of my dealer via chat. He guess(?) its the MoBo.

I´ll be back and let you know whats up.

As I´ve said before: props and big thx to everybody who wrote down his xp here
AT3am_Murd0ch
Member
+15|6872
This is something ive seen a few times before with enermax PSUs - and its an obvious one, but have you connected the 12v 4 pin Power Cable to the motherboard? It is in addition to the main power supply cable, and some enermax supplies do not have this cable attached...
Cybargs
Moderated
+2,285|7007

fon|sl4y3r wrote:

Update: I will bring my rig to the dealer in about one hour. My BMWs sixpack is started and ready for full throttle.

I was talking to a technican of my dealer via chat. He guess(?) its the MoBo.

I´ll be back and let you know whats up.

As I´ve said before: props and big thx to everybody who wrote down his xp here
heh i guessed it right i had this problem b4, hope u can get it fixed soon
https://cache.www.gametracker.com/server_info/203.46.105.23:21300/b_350_20_692108_381007_FFFFFF_000000.png
Slayer
---hates you
+1,137|7048|Hell, p.o box 666

Update once again: its the motherboard.

Right now, the CPU, GFX and RAM is working on the machine I´m using atm.

Never had issues with ASUS-boards before, there you go.
Cybargs
Moderated
+2,285|7007

fon|sl4y3r wrote:

Update once again: its the motherboard.

Right now, the CPU, GFX and RAM is working on the machine I´m using atm.

Never had issues with ASUS-boards before, there you go.
so do i get an extra +1 for guessing it right i just have to ask, can u get a refund and get another board? DFI lanparty venus is an awsome board for overclocking... one of those must get
https://cache.www.gametracker.com/server_info/203.46.105.23:21300/b_350_20_692108_381007_FFFFFF_000000.png
Slayer
---hates you
+1,137|7048|Hell, p.o box 666

okey dokey... system is working fine now. The motherboard was screwed (and if I say "screwed" I´m talking about screwed wrong). There where some screws placed on the case that gave a bad impulse to the northbrigde or southbrigde. Dont have a clue, but a new mainboard

+1 again for everybody who wrote down something here (actually I´m not able to give karma )

@Mods: please close

Board footer

Privacy Policy - © 2025 Jeff Minard