Will A 750Watt PSU Power this

2008-01-21 16:39:13

#1

killinzero1: Member; +14|6389

i just want to make sure that i have enough power to do this build

EVGA 132-CK-NF78-A1 LGA 775 NVIDIA nForce 780i SLI ATX Intel Motherboard
http://microcenter.com/single_product_r … id=0280427

EVGA NvidiaGeForce 8800 GT 512MB GDDR3 PCI-E 2.0 Video Card *will SLI later*
http://microcenter.com/single_product_r … id=0279319

Intel Core 2 Quad Q6600 Kentsfield 2.4GHz LGA 775 Quad-Core Processor Model BX80562Q6600
http://microcenter.com/single_product_r … id=0257938

Crucial Ballistix Tracer 2GB (2 x 1GB) 240-Pin DDR2 SDRAM DDR2 800 (PC2 6400) Dual Channel Kit Desktop Memory*will get a other 2GB later*
http://www.newegg.com/Product/Product.a … 6820148076

ASUS 18X DVD±R DVD Burner with LightScribe and 14X DVD-RAM Write Black SATA Model DRW-1814BLT - Retail
http://www.newegg.com/Product/Product.a … 6827135146

ChillTec Thermo Electric CPU Cooler
http://www.ultraproducts.com/product_de … ductID=571

Thermaltake ToughPower 750W Modular PSU W0116RU (Refurbished)
http://www.thermaltakeshop.com/ref/ref-powersupply.html

Thermaltake Armor Case Black w/ Window VA8000BWS (Refurbished)
http://www.thermaltakeshop.com/ref/ref-case.html

2008-01-21 16:39:53

#2

CommieChipmunk: Member; +488|6572|Portland, OR, USA

yessir

2008-01-21 16:41:03

#3

killinzero1: Member; +14|6389

ok question if i add 2GB more and other 8800gt will i have to buy a other power supply?

2008-01-21 16:41:12

#4

Poseidon: Fudgepack DeQueef; +3,253|6540|Long Island, New York

By far. I have that PSU, actually. Hasn't failed me once.

killinzero1 wrote:
ok question if i add 2GB more and other 8800gt will i have to buy a other power supply?

I doubt it. 2 gigs more requires barely any more power, and an 8800 GT doesn't require too much power (to my knowledge). I know people with 8800 GTX's in SLi and only have 700w PSUs.

Last edited by Poseidon (2008-01-21 16:42:02)

2008-01-21 16:42:43

#5

killinzero1: Member; +14|6389

oh ok bc i was using this watt calculator and it said i needed a 900watt PSU

2008-01-21 16:51:29

#6

Computer_Guy: Member; +54|6699

Its a little mch but it will

2008-01-21 17:54:44

#7

CrazeD: Member; +368|6675|Maine

It will run all of that without even breaking a sweat.

2008-01-21 17:59:43

#8

Xblade-3o5-: Oi, Suzy!; +113|6755|Florida, United States

I dont know if its accurate, but hey its from Newegg

http://educations.newegg.com/tool/psucalc/index.html

2008-01-21 19:11:41

#9

Little BaBy JESUS: m8; +394|6151|'straya

It should be fine (even with the etra 2GB and SLI) but if ur at all concerned it isnt much to boost it up to a 800Watt. that way u will be taking no chances.

2008-01-21 19:47:41

#10

CrazeD: Member; +368|6675|Maine

Little BaBy JESUS wrote:
It should be fine (even with the etra 2GB and SLI) but if ur at all concerned it isnt much to boost it up to a 800Watt. that way u will be taking no chances.

Wattage has nothing to do with anything.

Amperage is all that matters.

2008-01-21 22:33:49

#11

mikkel: Member; +383|6603

CrazeD wrote:
Little BaBy JESUS wrote:
It should be fine (even with the etra 2GB and SLI) but if ur at all concerned it isnt much to boost it up to a 800Watt. that way u will be taking no chances.
Wattage has nothing to do with anything.

Amperage is all that matters.

Wattage is the product of voltage and current, so amperage directly correlates with wattage in ATX power supplies, since ATX specifications set the voltage across the different rails in stone. What's important is how the current is distributed across the rails.

Wattage has a lot to do with everything. It's the total rating of how much power your supply can feed your components. The trick is to know how much power you can pull on each rail. Which sucks having to research.

2008-01-21 22:43:18

#12

Brasso: member; +1,549|6632

mikkel wrote:
CrazeD wrote:
Little BaBy JESUS wrote:
It should be fine (even with the etra 2GB and SLI) but if ur at all concerned it isnt much to boost it up to a 800Watt. that way u will be taking no chances.
Wattage has nothing to do with anything.

Amperage is all that matters.
Wattage is the product of voltage and current, so amperage directly correlates with wattage in ATX power supplies, since ATX specifications set the voltage across the different rails in stone. What's important is how the current is distributed across the rails.

Wattage has a lot to do with everything. It's the total rating of how much power your supply can feed your components. The trick is to know how much power you can pull on each rail. Which sucks having to research.

Helped me.

"people in ny have a general idea of how to drive. one of the pedals goes forward the other one prevents you from dying"

2008-01-21 22:57:46

#13

GodFather: Blademaster's bottom bitch; +387|6222|Phoenix, AZ

im runnin

AMD AM2 3.0Ghz Dual core (95nm) processor

4GB kingston (4x 1GB)

GeForce 7800GT 256MB

Liquid Coolent system (60 L/H)

4 led cathodes, 6x 90-120mm fans (10 in all)

2x Sata HDD's

and I use a 650W PSU with no problem (I think you should be set)

Last edited by GodFather (2008-01-21 22:58:01)

2008-01-21 23:11:09

#14

nukchebi0: Пушкин, наше всё; +387|6326|New Haven, CT

mikkel wrote:
Wattage has a lot to do with everything. It's the total rating of how much power your supply can feed your components. The trick is to know how much power you can pull on each rail. Which sucks having to research.

All you have to do is find the maximum combined power on your +12v rails (or those of the prospective power supply) and divide it by 12.

Last edited by nukchebi0 (2008-01-21 23:11:23)

2008-01-22 06:05:05

#15

Gawwad: My way or Haddaway!; +212|6687|Espoo, Finland

650W would suffice.
You didn't list any HDD's, though I doubt you have more than two so it's not a problem.

2008-01-22 06:59:30

#16

mikkel: Member; +383|6603

nukchebi0 wrote:
mikkel wrote:
Wattage has a lot to do with everything. It's the total rating of how much power your supply can feed your components. The trick is to know how much power you can pull on each rail. Which sucks having to research.
All you have to do is find the maximum combined power on your +12v rails (or those of the prospective power supply) and divide it by 12.

Takes more time than simply knowing that an E6600 is better than an E6400. Typically you'd want to do U*I to get P, rather than U/I, which would give you R, if I remember my Ohm's Law correctly.

Last edited by mikkel (2008-01-22 07:02:14)

2008-01-22 08:39:56

#17

CrazeD: Member; +368|6675|Maine

mikkel wrote:
CrazeD wrote:
Little BaBy JESUS wrote:
It should be fine (even with the etra 2GB and SLI) but if ur at all concerned it isnt much to boost it up to a 800Watt. that way u will be taking no chances.
Wattage has nothing to do with anything.

Amperage is all that matters.
Wattage is the product of voltage and current, so amperage directly correlates with wattage in ATX power supplies, since ATX specifications set the voltage across the different rails in stone. What's important is how the current is distributed across the rails.

Wattage has a lot to do with everything. It's the total rating of how much power your supply can feed your components. The trick is to know how much power you can pull on each rail. Which sucks having to research.

Meh.

I would feel safer with lower watts with higher amps than higher watts with lower amps.

2008-01-22 12:28:42

#18

killinzero1: Member; +14|6389

oo i was going to run 2 sata2 drive and my 2x 250 IDE drive for storage

2008-01-22 12:38:02

#19

jimmanycricket: EBC Member; +56|6657|Cambridge, England

Yes, i dont have to read it because 750 wats will power anything, even a small microwave, i mean wtf...

Quality before quantity. Make sure you buy a respected make over a shitty make that claims to be able to power a small residential estate.

As you should be aware a video card cannot drain more than 75W from the PCI-E slot. Now add on 2 - 6pin power connectors, they are 75 watts each so we have a total of 225W. (this why you need to check you 12V rails as alot of power needs to be on each one)

Even if you Sli thats only 450Watts, add the most power hungry proccessor 600Watts max. 100Watts free to power optical drives and fans. This is where we hit the slight snag.

Im assuming you want a mini fridge built in now these are quite power hungry 400Watts for the fridge/freezer and now, you need 1100 Watts.

Solution http://www.guru3d.com/article/psu/488/

Last edited by jimmanycricket (2008-01-22 12:39:24)

2008-01-22 12:45:35

#20

jimmanycricket: EBC Member; +56|6657|Cambridge, England

Hmm, damn it i knew i would need a small generator to power this.

https://xs123.xs.to/xs123/08042/lolpsu481.jpg

BF2S Forums Will A 750Watt PSU Power this

killinzero1 wrote:

Little BaBy JESUS wrote:

CrazeD wrote:

Little BaBy JESUS wrote:

mikkel wrote:

CrazeD wrote:

Little BaBy JESUS wrote:

mikkel wrote:

nukchebi0 wrote:

mikkel wrote:

mikkel wrote:

CrazeD wrote:

Little BaBy JESUS wrote:

Board footer