Win7 Repair

2013-03-13 14:00:52

#1

Mutantbear: Semi Constructive Criticism; +1,431|6172|London, England

I just replaced my motherboard on my computer and now it wont boot from my hdd anymore. When I start it up it goes to boot manager and says that so and so cant be read so repair using your windows install disc. So I put in my windows instal disc and it doesnt give me an option to repair it just goes to the install part after like 15 minutes of windows splash screen and if I back out of the install it just reboots.

It can see all my hdds when its booting so they are all plugged in but it just doesnt want to start. Is my windows installation disc bad? I dont know what the problem is.

https://www.symantec.com/business/support/library/BUSINESS/ATLAS/images_v1/351886/boot-error2-small.jpg

Last edited by Mutantbear (2013-03-13 14:18:48)

_______________________________________________________________________________________________

2013-03-13 14:10:04

#2

KEN-JENNINGS: I am all that is MOD!; +2,978|6840|949

Stupid question but is it set to boot from the correct hdd in bios?

2013-03-13 14:10:38

#3

Mutantbear: Semi Constructive Criticism; +1,431|6172|London, England

ya

_______________________________________________________________________________________________

2013-03-13 14:20:03

#4

KEN-JENNINGS: I am all that is MOD!; +2,978|6840|949

Check the connections from mobo to hdd. Are you sure it asks you to use the install disc and not a repair disc? Are you sure you're using the correct disc?

Just saw your screenshot. Can't you spam key presses to load from disc, and then follow the prompt?

2013-03-13 14:20:23

#5

Dauntless: Admin; +2,249|6950|London

Was it an OEM version of windows 7?

I think they lock themselves to the motherboard

2013-03-13 14:21:40

#6

bugz: Fission Mailed; +3,311|6520

Mash the F8 key on startup until the Advanced Boot menu comes up. You should have the option to repair from there.

Last edited by bugz (2013-03-13 14:28:34)

Steam: http://steamcommunity.com/id/ebug122

2013-03-13 14:23:05

#7

Mutantbear: Semi Constructive Criticism; +1,431|6172|London, England

KEN-JENNINGS wrote:
Check the connections from mobo to hdd. Are you sure it asks you to use the install disc and not a repair disc? Are you sure you're using the correct disc?

I didnt think there were two discs. I always thought there was only one disc and you could just choose like install and repair and all these options

I only have one disc and I dont have the box or anything else it came with

_______________________________________________________________________________________________

2013-03-13 14:24:59

#8

KEN-JENNINGS: I am all that is MOD!; +2,978|6840|949

Dauntless wrote:
Was it an OEM version of windows 7?

I think they lock themselves to the motherboard

This too. I have the OEM version. Call up windows and ask them to unlock.

2013-03-13 14:29:11

#9

Dauntless: Admin; +2,249|6950|London

what does the install screen look like?

is it like this but without a repair option?

https://www.justin5mins.com/wp-content/uploads/2011/04/win7install1.jpg

2013-03-13 14:33:09

#10

Mutantbear: Semi Constructive Criticism; +1,431|6172|London, England

Dauntless wrote:
what does the install screen look like?

is it like this but without a repair option?

no it didnt even have that. It went to a blue splash for like 5 min then said "setup is starting" for another 5 min then just spit me out in the install part.

bugz wrote:
Mash the F8 key on startup until the Advanced Boot menu comes up. You should have the option to repair from there.

The only options that gave we was to start win 7 (which just brought me to the error screen) and run a memtest. no repair anywhere.

_______________________________________________________________________________________________

2013-03-13 14:38:54

#11

Dauntless: Admin; +2,249|6950|London

yeh but which install part? you sure there isn't a repair option if you go to the next screen?

was this the screen?

https://spsexton.files.wordpress.com/2008/11/install-2.jpg

because i think the repair option is after that one

Last edited by Dauntless (2013-03-13 14:40:34)

2013-03-13 14:41:54

#12

Mutantbear: Semi Constructive Criticism; +1,431|6172|London, England

Dauntless wrote:
yeh but which install part? you sure there isn't a repair option if you go to the next screen?

was this the screen?

No it gave me the ToS and there was a progress bar at the bottom.

Also just mashing f8 wasnt even working so I hit delete right before the screen switched to the boot error message

_______________________________________________________________________________________________

2013-03-13 14:58:31

#13

Mutantbear: Semi Constructive Criticism; +1,431|6172|London, England

https://forum.acronis.com/sites/default/files/forum/2009/12/6758/bootmgr.png

I can get to this and i should be able to hit f8 to get to the advance boot options but it just puts me back at my original error message

_______________________________________________________________________________________________

2013-03-13 15:02:05

#14

Dauntless: Admin; +2,249|6950|London

do you know what version of windows it was? (windows 7 home premium 32bit? ultimate 64bit?)

2013-03-13 15:03:13

#15

Mutantbear: Semi Constructive Criticism; +1,431|6172|London, England

ultimate 64 I believe

_______________________________________________________________________________________________

2013-03-13 15:06:49

#16

Dauntless: Admin; +2,249|6950|London

you can download it legitimately from here:

http://msft.digitalrivercontent.net/win/X17-24395.iso

then make a bootable usb and put it on that

that should have a repair option, not sure why your disc doesn't

2013-03-13 17:51:43

#17

jsnipy: ...; +3,276|6730|...

Dauntless wrote:
Was it an OEM version of windows 7?

I think they lock themselves to the motherboard

that would trigger activation

If I was replacing a motherboard, I would do a fresh install ... you get away with not doing it sometimes if the chip sets are close.

2013-03-13 17:57:51

#18

Brasso: member; +1,549|6838

jsnipy wrote:
If I was replacing a motherboard, I would do a fresh install ... you get away with not doing it sometimes if the chip sets are close.

i agree

Last edited by Brasso (2013-03-13 17:58:03)

"people in ny have a general idea of how to drive. one of the pedals goes forward the other one prevents you from dying"

2013-03-13 18:24:28

#19

Mutantbear: Semi Constructive Criticism; +1,431|6172|London, England

I was using a bad disk. It repaired fine with the new disk

I have too much stuff to do a new install

Last edited by Mutantbear (2013-03-13 18:24:55)

_______________________________________________________________________________________________

2013-03-13 18:33:06

#20

Jaekus: I'm the matchstick that you'll never lose; +957|5386|Sydney

ctrl+alt+f4

2013-03-14 03:24:46

#21

Cheez: Herman is a warmaphrodite; +1,027|6646|King Of The Islands

This was caused by a change in your hard drive controller.

If you wish to do this in the future, get a Hirens Live CD and run the registry tool within it to reset Windows to a generic hard drive controller, thus able to boot again.

Install new Chipset drivers. Done.

Edit: Set your motherboard to IDE when booting the Hirens disc as it's based on XP, change back to ACHI when booting back to 7.

Last edited by Cheez (2013-03-14 03:26:11)

My state was founded by Batman. Your opinion is invalid.

2013-03-14 16:37:48

#22

_j5689_: Dreads & Bergers; +364|6925|Riva, MD

What version is Hirens on now?

2013-03-14 18:26:22

#23

Mutantbear: Semi Constructive Criticism; +1,431|6172|London, England

Cheez wrote:
This was caused by a change in your hard drive controller.

If you wish to do this in the future, get a Hirens Live CD and run the registry tool within it to reset Windows to a generic hard drive controller, thus able to boot again.

Install new Chipset drivers. Done.

Edit: Set your motherboard to IDE when booting the Hirens disc as it's based on XP, change back to ACHI when booting back to 7.

well i mean as long as i have a WORKING win7 cd its not a problem right?

_______________________________________________________________________________________________

2013-03-14 19:25:04

#24

pirana6: Go Cougs!; +691|6498|Washington St.

just noticed this thread,

fwiw, I tried the same thing, changing the MB (and ram) but keeping the hard drive and I ended up having to completely reinstall the OS. I never got it to work. Not saying it's impossible, just saying I was in the same boat as you and had to re do the whole thing.
Ended up buying a nice new 500GB drive so it was a clean start but yeah transferring all the files was a hassle.
Good luck.

2013-03-14 19:26:46

#25

Mutantbear: Semi Constructive Criticism; +1,431|6172|London, England

pirana6 wrote:
just noticed this thread,

fwiw, I tried the same thing, changing the MB (and ram) but keeping the hard drive and I ended up having to completely reinstall the OS. I never got it to work. Not saying it's impossible, just saying I was in the same boat as you and had to re do the whole thing.
Ended up buying a nice new 500GB drive so it was a clean start but yeah transferring all the files was a hassle.
Good luck.

dont put that bad mojo on me

_______________________________________________________________________________________________

BF2S Forums Win7 Repair

KEN-JENNINGS wrote:

Dauntless wrote:

Dauntless wrote:

bugz wrote:

Dauntless wrote:

Dauntless wrote:

jsnipy wrote:

Cheez wrote:

pirana6 wrote:

Board footer