erm as with any contact device, it will rub and create plastic dust mate, dont use WD40 it's got white spirit and wax in it, which will mostly likely only make it worse, it's for metal object, you should try first blowing the crap out with compressed air, which will likely leave a gap, try filling this with some form of THICK oil or perhaps petroleum jelly?(vasaline) vaseline may slow it down a little, can't remember but it's good for that.. a thick oil should be sufficient, but if that's not available try petroleum jelly (i'd warm it a little first to make it less viscous)
good luck
Last edited by SuB (2006-05-23 07:05:49)