uziq
Member
+492|3461

KEN-JENNINGS wrote:

no warranty against failure?

that smell is fucking terrible, btw
what's really fucking hilarious is that i could smell it for about 20 minutes before the pop happened. something was clearly overheating or nearing the end of its little electrical life. but i keep all of my whisky bottles next to my speaker stands and i seriously thought the smell was lagavulin if i ever have a heavy night on the islay scotch there is a lingering smell of iodine. for fucksake. i was literally smelling my beloved speakers burning to death and i thought it was delicious whisky.

and yeah, there's a warranty, but i got them second-hand from a recording studio (of course). all for the sake of saving about $300 at the time. sod's law.

Last edited by uziq (2016-02-06 01:00:04)

Dilbert_X
The X stands for
+1,810|6115|eXtreme to the maX
Open them up and change the parts yourself.
Русский военный корабль, иди на хуй!
uziq
Member
+492|3461
don't think you understand how main speaker cones in high-end audio equipment are constructed. to even look at the voice coil to see if it's unglued/burned up would involve destroying a lot of the assembly. and if it's a capacitor or something that needs replacing, it's an unreal nightmare trying to restore the crossover and balance of the speaker pair with different parts. kinda destroys the point of having $1500 speakers when they are unbalanced and sound off.

Last edited by uziq (2016-02-06 01:32:04)

Dilbert_X
The X stands for
+1,810|6115|eXtreme to the maX
There's a lot of twaddle in speaker design TBH.
A resistor is a resistor, a capacitor is a capacitor. Just pull the part number and you're good to go.

Or you can spend a lot of money on gold plated cables spun by sirens on Mount Olympus etc, the choice is yours.
Русский военный корабль, иди на хуй!
uziq
Member
+492|3461
yeah i'm not saying it's the greatest engineering challenge in the world, but what i am saying is that a speakers' sound profile is often highly specifically down to their driver construction and the parts used. i can't easily source the stuff that a tiny boutique company in berlin use. so i have to send a very heavy and fragile piece of equipment to the fucking GDR. i'm really hoping it's just the voice-coil glue that has come unstuck and shorted it out or something, because i was not mistreating these speakers at all...

if this was an everyday hi-fi in my living room and i didn't give a fuck, i'd probably seriously look into doing it myself. but they are meant to be forensic monitors. defeats the point.

Last edited by uziq (2016-02-06 01:39:39)

Dilbert_X
The X stands for
+1,810|6115|eXtreme to the maX
Don't they have an agent in the UK?

In the world of electronics everything can be sourced no trouble - unless its custom made by pixies or some very unique part made just for them.

If its an in-house part made only by them you are a bit fucked.
Русский военный корабль, иди на хуй!
uziq
Member
+492|3461
i have contacted them and i am lubricating my asshole in preparation to be raped

Last edited by uziq (2016-02-06 02:08:44)

Cybargs
Moderated
+2,285|6725
https://images1.fanpop.com/images/image_uploads/vondersexxx-eurotrip-1079289_757_557.jpg

Remember the safeword!
https://cache.www.gametracker.com/server_info/203.46.105.23:21300/b_350_20_692108_381007_FFFFFF_000000.png
Dilbert_X
The X stands for
+1,810|6115|eXtreme to the maX
I'd at least take the back off and have a look. I do that when things are working fine though.
Русский военный корабль, иди на хуй!
Jay
Bork! Bork! Bork!
+2,006|5367|London, England

uziq wrote:

yeah i'm not saying it's the greatest engineering challenge in the world, but what i am saying is that a speakers' sound profile is often highly specifically down to their driver construction and the parts used. i can't easily source the stuff that a tiny boutique company in berlin use. so i have to send a very heavy and fragile piece of equipment to the fucking GDR. i'm really hoping it's just the voice-coil glue that has come unstuck and shorted it out or something, because i was not mistreating these speakers at all...

if this was an everyday hi-fi in my living room and i didn't give a fuck, i'd probably seriously look into doing it myself. but they are meant to be forensic monitors. defeats the point.
Nearly every component is off the shelf and standard. Very little in the world is custom made except machines. I guarantee you could order the part for cheap.
"Ah, you miserable creatures! You who think that you are so great! You who judge humanity to be so small! You who wish to reform everything! Why don't you reform yourselves? That task would be sufficient enough."
-Frederick Bastiat
uziq
Member
+492|3461
the burning smell is most likely the epoxy glue they use to glue the voice-coil in the driver part of the speaker to its circular founding (normally made of aluminium or something semi-heatstink suitable in higher end speakers; cardboard and low quality paper in piece of shit hi-fis). if you have ever looked at a high-level speaker, you would realise that the voice-coil is nestled deep inside an apparatus that basically needs to be ripped apart – i.e. the 'spider' nesting that keeps it in suspension behind the speaker's front cone. i would have to gut the speaker in order to reglue or replace the voice-coil. this is pretty much replacing the whole speaker. to order the whole driver apparatus from the manufacturer would probably cost me 70% of the units total value. there isn't much else to an (active) speaker other than the small amplifier and power supply, the body, and a tweeter (as expensive and high-level as this one is, it's still not that valuable).

i'm basically feeling really blue. weep.

https://www.gearslutz.com/board/attachments/reviews/269453d1325302593-adam-a7x-0003.jpg

Last edited by uziq (2016-02-06 06:07:58)

Dilbert_X
The X stands for
+1,810|6115|eXtreme to the maX
If its that then you're screwed, no option but return to manufacturer, or specialist repairer.
Русский военный корабль, иди на хуй!
uziq
Member
+492|3461
aye, well the manufacturer is in germany and i know i'm fucked on warranty so i might save myself the insane shipping fees + wait time and take it to some workshop wizard in bristol. not as if i have anything to lose by him opening it up and fucking with the components. it's just whether or not i can source a driver from the original manufacturer. replacing the whole speaker will cause serious financial hurt >
uziq
Member
+492|3461
so you can see a healthy PCB in that above picture from the internet.

here's mine.



that's the sight of my broken heart, right there. also don't cuss me for vertical video: i'm holding an iPhone 6 inside a fucking speaker.

on the bright side i guess that means it isn't the impossible to fix voice-coil or super expensive driver that has broken. no wonder my room fucking reeked. that circuit board looks like the beginning of a decent electrical fire. i've got a multimeter, soldering kit and a maplin nearby so i could probably fix it myself, but for the fact that it's such a fiddly job and the speaker components are fragile as fuck. i'll get it serviced. feeling a bit better now i know it's not the beautiful speaker.

Last edited by uziq (2016-02-06 13:57:53)

SuperJail Warden
Gone Forever
+635|3728
Ask one of your Asian girls to fix it or build you a new one.
https://i.imgur.com/xsoGn9X.jpg
uziq
Member
+492|3461
lol 8/10
unnamednewbie13
Moderator
+2,053|6781|PNW

That closing "fuck" says all there needs to be said about speaker mess.
Dilbert_X
The X stands for
+1,810|6115|eXtreme to the maX
Probably better take it to someone who knows what they are doing and can figure out the root cause or it will happen again.

Also I can't find the thread about repairing iPhones. Good luck with your backstreet iPhone-wallahs. Apple done fucked you.
http://www.theguardian.com/money/2016/f … rty-repair
Русский военный корабль, иди на хуй!
uziq
Member
+492|3461
i bought a new iPhone 6 from the apple store. they said there was nothing else for it (of course).

next weekend my speaker burns out.

having a run of bad luck eh
Dilbert_X
The X stands for
+1,810|6115|eXtreme to the maX
So much for that simple plan.
https://i.imgur.com/5Yqtuvl.jpg
Fuck my life
Русский военный корабль, иди на хуй!
Jay
Bork! Bork! Bork!
+2,006|5367|London, England
Retiling a bathroom?

Last edited by Jay (2016-02-07 05:31:49)

"Ah, you miserable creatures! You who think that you are so great! You who judge humanity to be so small! You who wish to reform everything! Why don't you reform yourselves? That task would be sufficient enough."
-Frederick Bastiat
Dilbert_X
The X stands for
+1,810|6115|eXtreme to the maX
Retiling a washroom and trying to move a socket.

It seemed so simple, move it 100mm up the wall, opened it up, yup the cables go straight up like they're supposed to, just chip it back and done.

I smashed the tiles off with a chisel, 1mm deeper and I'd have gone through a live cable. I'm sure everyone would have missed me.

As it is I have to figure out what to do now, starting with a wire kinked 180 degrees.

Last edited by Dilbert_X (2016-02-08 00:58:11)

Русский военный корабль, иди на хуй!
Dilbert_X
The X stands for
+1,810|6115|eXtreme to the maX

uziq wrote:

i bought a new iPhone 6 from the apple store.
Sweet, you can use it for this
http://www.theverge.com/2016/2/5/109225 … s-vuignier
Русский военный корабль, иди на хуй!
unnamednewbie13
Moderator
+2,053|6781|PNW

Pocket Mortys is incompatible with my new Samsung Galaxy …
SuperJail Warden
Gone Forever
+635|3728
Valentine's day should be in June or July. It makes no sense that the holiday you are supposed to take someone out on falls on the time of year where it is 17 degrees outside.
https://i.imgur.com/xsoGn9X.jpg

Board footer

Privacy Policy - © 2024 Jeff Minard