Mitch92uK
aka [DBS]Mitch92uK
+192|6233|United Kingdom
Hey guys ...

Ok I'll give you the whole story ....

I bought my "Razer Diamondback Plasma" in March of 07, from ebuyer. I had some initial probs with drivers/assigning buttons to begin with but other than that it's been fine.

https://img227.imageshack.us/img227/4489/diamondbackplasma56a6adng5.jpg

A few weeks ago I started having problems with my mouse disconnecting. I had changed nothing and it seemed to just start happening randomly :S The disconnects often happen at random and sometimes there will be 2/3/4 in a row

What the mouse will do is work fine and then suddenly make the USB disconnect noise, at which point i can't use it, before making the USB recognised noise a few seconds later, and working fine again.

Ok so when this started happening i thought i'd update drivers. turns out they're the same ones i had as they discontinued the diamondback. So, I emailed techsupport instead;

"Hello

I am having problems with my razer diamondback. The connection keeps dropping, the pc makes the USB noises and after about a second after disconnecting it reconnects. This is becoming problematic for scrimming etc. and has only just begun happening. It is as if i am removing the diamondback's USB connection and then plugging it back in a second after, but I am not!

I did register the s/n of the mouse when i bought it, but i cannot remember my login details unfortunately or the email i used to do so

Your help is greatly appreciated

mitch"


Their response;

"Hello,

Please test your Razer Diamondback on another PC (without installing any driver) and reply back to us with your findings so we may determine whether this issue is truly due to a faulty mouse or otherwise.

Thank you for your patience and understanding.
Best Regards,
Razer Customer Support
www.razersupport.com


Ok, so I tested my mouse in my bro's Pc, running Media Centre as it's OS ... is was fine and there were no disconnects.

I replied again to the email;

"Helo again,

I have tried my mouse in another computer, there were no problems. I used
the mouse on my own machine without drivers and there were still
disconnecting issues. Also, upon installing some new drivers, i received a
BSOD, with the name "razerlow.sys" and this has happened before.

Many thanks,
Mitch"


As mentioned, upon me trying to install some fresh drivers I began receiving BSOD's with "Razerlow.sys" as the message....

Their final and most recent response;

"Hi there,

Please do a reinstallation of the drivers. This time a round, please remember to remove the Registry Files as mentioned below.

Use the Add/Remove Uninstall function in the Control Panel to remove the Razer Diamondback Drivers.

Then follow these instructions:

1. Are you using an antivirus program such as Norton, if so please disable it for the install.

2. Check to see if there are any folders left behind. By default they will be in C:\Program Files\Razer\Diamondback if so delete them.

3. Check for any registry keys that may have been left behind and delete them. It's normal if you are not able to find some or if not all of the below.

Go to Start\ Run\ type in "regedit" without the quotes. Locate the following keys and delete them. Please keep in mind that it is possible not all these keys are on your system.

HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\{85C6CE1E-2A22-4C5A-A8A1-9DBFBEA81DE1}
HKEY_CURRENT_USER\SOFTWARE\Karna
HKEY_CURRENT_USER\Control Panel\Mouse\razer
HKEY_CURRENT_USER\Software\Karna\Razer
HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\MenuOrder\Start Menu2\Programs\Razer
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\App Paths\razertra.exe
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Run and look for Razer entry. Delete if present
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\{D6D5CFB3-7095-4073-B6B7-B7E909838C57}
HKEY_LOCAL_MACHINE\SOFTWARE\TerraTec Electronic GmbH
HKEY_LOCAL_MACHINE\SYSTEM\ControlSet001\Control\CriticalDeviceDatabase\hid#vid_1532&pid_0001
HKEY_LOCAL_MACHINE\SYSTEM\ControlSet001\Services\Eventlog\System\razerusb
HKEY_LOCAL_MACHINE\SYSTEM\ControlSet001\Services\Razerlow
HKEY_LOCAL_MACHINE\SYSTEM\ControlSet001\Services\razerusb

Close out the registry editor and restart the machine.

5. Check for C:\Program Files\InstallShield Installation Information\{D6D5CFB3-7095-4073-B6B7-B7E909838C57} and delete
6. Shut down computer, leave off for 30 seconds and turn back on.
7. Download and install the drivers from the Razersupport.com site

Also test the mouse in another machine that has not been installed with any Razer Drivers previously."




Last night I did this exactly, removing every trace of the driver, reinstalled and it's still disconnecting

Any ideas please post as I'm in need of advice

Just as a quick breakdown then as to what is happening and what i've done :

*Mouse starts disconnecting at random after having changed nothing
**Reinstalled Drivers as well as switched USB port - no luck
**Start getting BSOD's with "Razerlow.sys"
**Tried in another PC for about 15minutes - no disconnect
**Following emailed instructions completely removed all traces of driver and reinstalled - no luck


Long post I know, thanks for taking the time to read it

Any ideas please post

~Mitch
.Sup
be nice
+2,646|6451|The Twilight Zone
Update your firmware. My Copperfield wasn't compatible with my mobo so i had to update the firmware, i suspect you have a similar compatibility issues with your Diamondback.
https://www.shrani.si/f/3H/7h/45GTw71U/untitled-1.png
Mitch92uK
aka [DBS]Mitch92uK
+192|6233|United Kingdom
Where can I find firmware for me Diamondback .sup?

http://www.razersupport.com/index.php?_ … &nav=0

No firmware. Or am I looking in the wrong place?
.Sup
be nice
+2,646|6451|The Twilight Zone
Ugh it seems that the Diamondback doesn't have any firmware to update. Have you tried the new drivers then?
http://www.razersupport.com/index.php?_ … ditemid=74

Last edited by .Sup (2008-02-10 07:06:07)

https://www.shrani.si/f/3H/7h/45GTw71U/untitled-1.png
xGj
Official lame Crysis fanboy.
+84|6370|Netherlands tbh
If the firmware thing doesn't work, it looks like a windows issue could be happening aswell. might want to reformat and reinstall (if all else fails), you can also keep sending emails, they'll give you support I guess.
FloppY_
­
+1,010|6284|Denmark aka Automotive Hell
I HAD the exact same problem with my MX518 at the exact same time

I hate it, and I am now forced to use PS2 port

Need fix !!!!


Specs:
MSI Neo mobo
2 Gigs ram
Nvidia 7900GTO
Raptor 36 Gb 10,000 rpm HDD
Samsung 250 Gb 7,200 rpm HDD
Windows Media Center Edition

Last edited by FloppY_ (2008-02-10 07:11:08)

­ Your thoughts, insights, and musings on this matter intrigue me
.Sup
be nice
+2,646|6451|The Twilight Zone
I looks like mobo incompatibility. Check if there's any new driver update for the mobo (usb's).
https://www.shrani.si/f/3H/7h/45GTw71U/untitled-1.png
FloppY_
­
+1,010|6284|Denmark aka Automotive Hell

.Sup wrote:

I looks like mobo incompatibility. Check if there's any new driver update for the mobo (usb's).
I updated my mobo driver - nothing
And I did not have ANY problems with this in the past year I have had this mouse and mobo
­ Your thoughts, insights, and musings on this matter intrigue me
.Sup
be nice
+2,646|6451|The Twilight Zone

FloppY_ wrote:

.Sup wrote:

I looks like mobo incompatibility. Check if there's any new driver update for the mobo (usb's).
I updated my mobo driver - nothing
And I did not have ANY problems with this in the past year I have had this mouse and mobo
When did this started happening? have bough and connected any new USB or other devices?
https://www.shrani.si/f/3H/7h/45GTw71U/untitled-1.png
FloppY_
­
+1,010|6284|Denmark aka Automotive Hell
Nothing new as far as i know,, it just started...

So i assume it is a windows update incompability
­ Your thoughts, insights, and musings on this matter intrigue me
.Sup
be nice
+2,646|6451|The Twilight Zone

FloppY_ wrote:

Nothing new as far as i know,, it just started...

So i assume it is a windows update incompability
Try doing a system restore. It always helps for me.
https://www.shrani.si/f/3H/7h/45GTw71U/untitled-1.png
Mitch92uK
aka [DBS]Mitch92uK
+192|6233|United Kingdom

.Sup wrote:

Ugh it seems that the Diamondback doesn't have any firmware to update. Have you tried the new drivers then?
http://www.razersupport.com/index.php?_ … ditemid=74
Yeah it's what I'm using atm

xGj wrote:

If the firmware thing doesn't work, it looks like a windows issue could be happening aswell. might want to reformat and reinstall (if all else fails), you can also keep sending emails, they'll give you support I guess.
Yeah xG as much as i don't wanna reformat it seems a windows issue might be happening

.Sup wrote:

I looks like mobo incompatibility. Check if there's any new driver update for the mobo (usb's).
http://support.packardbell.com/uk/item/ … on_ixtreme

Still using the OEM mobo so it seems that ^^ is the BIOS update, haven't updated it sinc e i bought it about 4 years ago .... you think it could work?
FloppY_
­
+1,010|6284|Denmark aka Automotive Hell

.Sup wrote:

FloppY_ wrote:

Nothing new as far as i know,, it just started...

So i assume it is a windows update incompability
Try doing a system restore. It always helps for me.
No thx, that does more damage than good to windows in my experience
­ Your thoughts, insights, and musings on this matter intrigue me
.Sup
be nice
+2,646|6451|The Twilight Zone
I'm not gonna reply on the bios question. To be totally honest i have always avoided updating bios, the new mobos have a good safety system if you screw something up but a 4-year old PC? Ah don't listen to me.
https://www.shrani.si/f/3H/7h/45GTw71U/untitled-1.png
.Sup
be nice
+2,646|6451|The Twilight Zone

FloppY_ wrote:

.Sup wrote:

FloppY_ wrote:

Nothing new as far as i know,, it just started...

So i assume it is a windows update incompability
Try doing a system restore. It always helps for me.
No thx, that does more damage than good to windows in my experience
If you say so.
https://www.shrani.si/f/3H/7h/45GTw71U/untitled-1.png
FloppY_
­
+1,010|6284|Denmark aka Automotive Hell
Mitch use a USB->PS2 converter,, thats what I do...
­ Your thoughts, insights, and musings on this matter intrigue me
Mitch92uK
aka [DBS]Mitch92uK
+192|6233|United Kingdom

FloppY_ wrote:

Mitch use a USB->PS2 converter,, thats what I do...
MMk i'll have a look for one
cheers
.Sup
be nice
+2,646|6451|The Twilight Zone

FloppY_ wrote:

Mitch use a USB->PS2 converter,, thats what I do...
Razer mice have a special usb interpolation option, he will loose it if he swaps to ps2. But if he doesn't use it... Though i would still rather reinstall Windows than go with a ps2 port.
https://www.shrani.si/f/3H/7h/45GTw71U/untitled-1.png
FloppY_
­
+1,010|6284|Denmark aka Automotive Hell

.Sup wrote:

FloppY_ wrote:

Mitch use a USB->PS2 converter,, thats what I do...
Razer mice have a special usb interpolation option, he will loose it if he swaps to ps2. But if he doesn't use it... Though i would still rather reinstall Windows than go with a ps2 port.
define interpolation option?

And that is a matter of preference

I don't want to format -> reeinstall if i can avoid it :p
­ Your thoughts, insights, and musings on this matter intrigue me
.Sup
be nice
+2,646|6451|The Twilight Zone

FloppY_ wrote:

.Sup wrote:

FloppY_ wrote:

Mitch use a USB->PS2 converter,, thats what I do...
Razer mice have a special usb interpolation option, he will loose it if he swaps to ps2. But if he doesn't use it... Though i would still rather reinstall Windows than go with a ps2 port.
define interpolation option?

And that is a matter of preference

I don't want to format -> reeinstall if i can avoid it :p
Can't say much about this option since my drivers aren't installed but store in my mouse so i can't view my settings atm. But to avoid reinstalling windows i recommend Backup software. I use Norton Ghost8 and whenever there is a problem with windows or software i do a restore. It restores Windows and apps in matter of minutes.
https://www.shrani.si/f/3H/7h/45GTw71U/untitled-1.png
Mitch92uK
aka [DBS]Mitch92uK
+192|6233|United Kingdom

.Sup wrote:

FloppY_ wrote:

.Sup wrote:

Razer mice have a special usb interpolation option, he will loose it if he swaps to ps2. But if he doesn't use it... Though i would still rather reinstall Windows than go with a ps2 port.
define interpolation option?

And that is a matter of preference

I don't want to format -> reeinstall if i can avoid it :p
Can't say much about this option since my drivers aren't installed but store in my mouse so i can't view my settings atm. But to avoid reinstalling windows i recommend Backup software. I use Norton Ghost8 and whenever there is a problem with windows or software i do a restore. It restores Windows and apps in matter of minutes.
However word this is literally just after i posted i rebooted and got a registry corruption in the system32/software folder ... i had to reformat and the disconnects are still happening

Last edited by mitch212k_2 (2008-02-10 09:17:46)

.Sup
be nice
+2,646|6451|The Twilight Zone

mitch212k_2 wrote:

.Sup wrote:

FloppY_ wrote:


define interpolation option?

And that is a matter of preference

I don't want to format -> reeinstall if i can avoid it :p
Can't say much about this option since my drivers aren't installed but store in my mouse so i can't view my settings atm. But to avoid reinstalling windows i recommend Backup software. I use Norton Ghost8 and whenever there is a problem with windows or software i do a restore. It restores Windows and apps in matter of minutes.
However word this is literally just after i posted i rebooted and got a registry corruption in the system32/software folder ... i had to reformat and the disconnects seemed to have stopped =0
To fix my registry i used Amust registry cleaner, awesome program but nowadays i just use CCleaner.
https://www.shrani.si/f/3H/7h/45GTw71U/untitled-1.png
Mitch92uK
aka [DBS]Mitch92uK
+192|6233|United Kingdom

.Sup wrote:

mitch212k_2 wrote:

.Sup wrote:


Can't say much about this option since my drivers aren't installed but store in my mouse so i can't view my settings atm. But to avoid reinstalling windows i recommend Backup software. I use Norton Ghost8 and whenever there is a problem with windows or software i do a restore. It restores Windows and apps in matter of minutes.
However word this is literally just after i posted i rebooted and got a registry corruption in the system32/software folder ... i had to reformat and the disconnects seemed to have stopped =0
To fix my registry i used Amust registry cleaner, awesome program but nowadays i just use CCleaner.
Blue screened on bootup though I couldn't get anywhere
.Sup
be nice
+2,646|6451|The Twilight Zone

mitch212k_2 wrote:

.Sup wrote:

mitch212k_2 wrote:


However word this is literally just after i posted i rebooted and got a registry corruption in the system32/software folder ... i had to reformat and the disconnects seemed to have stopped =0
To fix my registry i used Amust registry cleaner, awesome program but nowadays i just use CCleaner.
Blue screened on bootup though I couldn't get anywhere
Backup your Windows next time
https://www.shrani.si/f/3H/7h/45GTw71U/untitled-1.png
GCFC
Davide Santon
+45|5927|NY/CT
try a different usb port on your computer..

Board footer

Privacy Policy - © 2024 Jeff Minard